For over 15 years, CS Medical LLC has been a leader in developing, manufacturing, and marketing medical devices that are designed to provide cleaning and high-level disinfection of ultrasound TEE probes. Our products are engineered and developed with one single objective in mind: to minimize the potential of patient exposure to improperly reprocessed TEE ultrasound probes.
Our core product, the TD 100® Automated TEE Probe Disinfector, is an example of our ongoing commitment to innovation and to the health and safety of medical patients and staff. The TD 100 eliminates manual reprocessing of delicate and expensive TEE ultrasound probes while providing a repeatable and FDA cleared disinfection process.
The TEEClean® Automated TEE Probe Cleaner Disinfector will continue the TD 100's work by automating the required cleaning process for the TEE probe before high-level disinfection. TEEClean, with electronic record data logging, printed verification reporting, FDA cleared cleaning, and high-level disinfection will be the standard of care for TEE ultrasound probes.
Located in Creedmoor, North Carolina, CS Medical's products provide quality device care and storage by minimizing healthcare operational costs, improving device readiness and increasing regulatory compliance.
TEEClean Automated TEE Probe Cleaner Disinfecor is the first product of its kind tobe cleared by the US FDA. Designed exclusively for transesopageal echocardiogramultrasound probes (TEE), TEEClean accomplishes both the manufacturers recommendedcleaning and high level disinfection of soiled TEE probes in the same device.
Step One: Bedside Cleaning
All pre-cleaning must take place at the point of useStep Two: Clean & High-Level Disinfect
Accomplish both the manufacturers recommended cleaning and HLD of soiled TEE probes.
The TD 100 delivers high level disinfection to TEE probes in ONLY 5 minutes. The TD 100 disinfects each TEE probe with High-level disinfectant and provides printed verification upon completion of successful disinfection cycle. Microprocessor-controlled, the TD 100 is simple to use for any health care professional reprocessing a used TEE ultrasound probe.
Step One: Bedside Cleaning
All pre-cleaning must take place at the point of useStep Two: Cleaning
Required by TEE probe manufacturers prior to HLD.Step Three: High-Level Disinfection
HLD is required for items that come in contact with mucous membranes or non-intact skin.
Faq
A: No, TEEClean cleans and disinfects a TEE probe.
A: No, bedside cleaning is done when the TEE/TOE probe is removed from the patient's mouth. The use of an enzymatic with an applicator is required to begin the process of removal of inorganic and organic matter that can dry on the TEE/TOE probe and result in biofilm being formed. ?Cleaning, also known as the manufacturers' recommended cleaning method, is performed prior to high-level disinfection. This process utilizes an enzymatic solution in the form of a bath. ?This process allows the probe to soak for 2-3 minutes before removing, rinsing and then drying.
A: The foam is easily removed for surface disinfection. The foam pad is closed cell and will not adsorb moisture or foster bacteria growth. An approved surface disinfectant should be used to ensure material compatibility.
Latest News
| 冲喜新娘,总裁的七日恋人,冷总裁的俏丫头 | ||||
| home | about | news | Partners | contact |
| 冷相追妻之嫡女难宠263 | 嫡女不好惹乱世毒后115 | 嫡女嫁给残暴王爷 | 医女嫡妻王妃太倾城免费全文阅读 | 长女嫡女庶女是什么关系 |
| 重生嫡女为谋百度云 | 叶国公府嫡女夜歌 | 嫡女无忧一粟红尘简介 | 嫡女策妖娆世子妃txt | 重生之嫡女毒后txt百度云 |
